There’s a whole world of guitarists and musicians – some are talented professionals, some simply like to strum along. Some musicians just leave their guitars on the spot where they last played it, and some even go to the other extreme – locking their guitars in durable cases until they need them again.
Now, we’re mainly interested in the category of musicians in between – average musicians who are not sickly obsessed with the well-being of their instruments, but who don’t want to see their guitar gets ruined.
How will you benefit from making your own guitar stand?
The function of a guitar stand is quite obvious, but what are the benefits you can take advantage of? There must be more to it than simply holding a guitar in an upright position. There’s a manifold of benefits and advantages when it comes to guitar stand diy:
- You get to choose how it will look like
The best thing about a homemade guitar stand is that you get the opportunity to choose how it will look like. Manufacturers and brand nowadays offer a wide catalog of guitar stands that range from simple and straightforward, to overly (and unnecessarily) delicate and complex. Here, you’re the boss of your own work.
- Make it as large (or as small) as you want
Bigger guitar stands are often built with greater care and with a design that’s more beautiful. The reason for this is because the manufacturers often want to bait you in with flashy design, urging you to buy a stand that can hold many guitars. The problem is, most people own only one, and overpay their larger stands.
- Choose the material according to your budget (and your skills)
Being a “boss of your own work”, you can make your guitar stand out of any material you want. We’ve mentioned that you don’t need any skills to make your own guitar stand, and that’s true. However, if you decide to use a material that requires another set of skills in order to be tampered, welded, cut, or such, that’s up to you.
Building a fashionable, plain, reliable, and cost-effective guitar stand is easy, and everyone can do it. However, the only way that this tutorial will work to your benefit so you can utilize it 100% is that you follow it to the letter. The material we recommend is wood.
- The thrill of making something from scratch
Not all benefits are material. Making something of your own is always a thrilling experience. Your sweat will be the witness to your hard work, and the finished product will be the proof of your well-invested hours, days, and nights.
It’s substantially less expensive when compared to “buying” your own stand
Manufacturers add their “handwork” to the total price of their guitar stands, and that’s the main reason why building your own will be a lot cheaper. Material (on its own) isn’t too expensive, and most homes are equipped with a set of basic tools that are required for the job.
Making your own guitar stand is simple – just follow these steps
Before you get to the “steps to guitar stand diy”, there are a couple of things you need to do. Things like getting the supplies you need, deciding on the material, choosing the dimensions, and such. Now, the step “0” is making all of the preparations needed for the job. Once you’ve done this, we can proceed.
- Step 1 – Put the concept on paper
If you think that you can remember all the details, I implore you to reconsider. If you follow these steps, making your own guitar stand will be easy, but we can’t guarantee your success if you stray too far from them.
Now that we got that clear, you should get your concept on paper. Consider including these things:
- The organization of each step
- Precise, actual dimensions
- A specific type of material + quantity
After you’ve done this, you need to make a concept that you will translate onto the material at a later point. The “first concept” is there to remind you of what you need to do (and in what order) while the second one would show you where you need to cut or drill.
- Step 2 – Make the pattern and draw it on the material
You will need a ruler, an angled ruler, and a pen for this step. Simply draw the lines so that the final result resembles the picture below:
- Step 3 – Use a drill to make two holes
To determine the size of these holes, you will use the “thickness of your boards” as a starting point. You will need to drill two holes in these points:
- Step 4 – Cut away the excess pieces
This pattern will leave you with “two halves” of your guitar stand – cut these lines precisely, and you will get the parts you need. If you want to know whether the job is done right – the middle section should resemble the letter “F” in italic font.
- Step 5 – Sanding
Craftsmen often call the final stage of the manufacturing process the “finish”. Now, the type of finish depends on the material used. There are times when you need to graze your product, to add another layer, to drench it in water or to let it dry. In this case, you will need to sand it. Use a sanding tool to make the surface area smooth to the touch.
- Step 6 – Putting the pieces together
Once you’ve done with sanding, you should simply take both pieces and attach them together. This was pretty obvious, and it’s the final stage in “guitar stand diy”.
The Closing Words
If you followed the aforementioned steps, you have already made your own guitar stand. As we’ve mentioned earlier, it’s quite easy, everyone can do it, but it requires a bit of your time and effort. Some steps are simple, but some are pretty tough – especially the part where you need to draw the lines and patterns, but you need to pay attention to every little detail. Even the easy parts can get tricky if you’re not focused.